Limited-Time Offer: Flat 15% OFF on Pre-Launch Orders!First 100 Customers Get Free Custom Engraving!

Size Guide

Ring sizes

Every ring is listed in US sizes, cut to order from size 3 to 13 in half steps. Inside diameter and circumference are the two measurements that matter — match either one and the size follows.

Find my size

Measured your finger already? Enter the reading in millimetres.

Not measured yet? The two methods opposite take a minute.

How to measure

mm

1 · With a paper strip

  1. 1. Cut a strip of paper about 6 mm wide.
  2. 2. Wrap it around the base of the finger, snug but not tight.
  3. 3. Mark where it overlaps, unwrap, and measure to the mark in mm.
  4. 4. That reading is your circumference — enter it opposite.
inside

2 · From a ring you own

  1. 1. Pick a ring that fits the same finger.
  2. 2. Lay it flat and measure straight across the inside edge.
  3. 3. That reading is your inside diameter — switch the unit opposite.

Full chart

US sizeInside diameterInside circumference
314.1 mm44.2 mm
3.514.5 mm45.5 mm
414.9 mm46.8 mm
4.515.3 mm48.0 mm
515.7 mm49.3 mm
5.516.1 mm50.6 mm
616.5 mm51.9 mm
6.516.9 mm53.1 mm
717.3 mm54.4 mm
7.517.7 mm55.7 mm
818.1 mm57.0 mm
8.518.5 mm58.2 mm
918.9 mm59.5 mm
9.519.4 mm60.8 mm
1019.8 mm62.1 mm
10.520.2 mm63.3 mm
1120.6 mm64.6 mm
11.521.0 mm65.9 mm
1221.4 mm67.2 mm
12.521.8 mm68.5 mm
1322.2 mm69.7 mm

Measure warm

Fingers shrink in the cold. Measure at the end of the day, at room temperature.

Mind the knuckle

If the knuckle is wider than the base, size to slip over it — then tell us and we will fit the band.

Wide bands sit tighter

Anything over 6 mm wide wears about a half size smaller. Go up a half.

Measure three times

Take the reading on three different days and use the largest.

Still not certain?

We will post you a complimentary ring sizer, and the first resize on any piece is free within 60 days of delivery.

Request a sizer